Information center
Information CenterThere are many methods of fuel water separation, including physical separation, chemical separation, electric flotation separation, etc.
2021-04-25The fuel filter must be replaced every 30,000 kilometers in normal use. If the fuel impurity content is large, the driving distance should be shortened accordingly. But generally w...
2021-04-24Don't forget the original intention, stick to the quality
2021-04-24If you can’t remove the oil filter element, you can directly destroy the circular section of the lower side of the filter and release the waste oil, and then use a wrench to rotat...
2021-04-23There are three types of air filtration: inertia, filtration and oil bath. Vehicles that often work in harsh environments should be replaced once no more than 10,000 kilometers
2021-04-22The air filter is installed in front of the carburetor or intake pipe to filter out dust and sand particles in the air, ensuring sufficient and clean air enters the cylinder; the m...
2021-04-21Before removing the oil filter element, you need to start the engine to run for a while, which will make it easier to remove it. In 4s shops or auto repair shops, there are special...
2021-04-20The function of the air filter is to filter the impurities in the air entering the cylinder to reduce the wear of the relevant parts of the compression system. At present, the air ...
2021-04-17