The air filter is installed in front of the carburetor or intake pipe to filter dust and sand in the air and ensure that sufficient and clean air enters the cylinder.
Because the engine needs to suck in a large amount of air to work, if the air is not filtered, the dust in the air will be sucked into the cylinder, accelerating the wear of the piston group and cylinder. If larger particles enter between piston and cylinder, it may cause serious "cylinder pulling" phenomenon, especially in dry and sandy working environment.
Function: The high-quality diesel filter can effectively block the dust and moisture contained in the diesel, and can effectively extend the service life of the fuel injection pump, diesel nozzle and other filter elements.
Large and small oil droplets can be easily separated through the oil-gas separator, while small oil droplets (suspended oil particles) must be filtered through the micron glass fiber layer of the oil-gas separation filter element. When the diameter and thickness of glass fiber are correctly selected, the filter material can intercept, diffuse and polymerize the oil mist in the gas, and the effect can be the best.
Small oil droplets quickly gather into large oil droplets, which pass through the filter layer and accumulate at the bottom of the filter element under the pneumatic and gravity drive, and then return to the lubrication system through the oil return pipe inlet at the bottom of the filter element, so that the compressor can discharge more pure and oil-free compressed air. Spin-on oil filter is widely used in the field of machinery
The widely used new oil filter has the characteristics of simple installation, quick replacement, good sealing, high pressure resistance and high filtering accuracy. It is widely used in oil-lubricated screw compressors, piston compressors, generator sets, various domestic and imported heavy-duty vehicles, loaders and engineering machinery and equipment.
The spin-on oil filter assembly is equipped with high-strength aluminum alloy filter head, which is used to lubricate the lubricating oil circulation system of the screw compressor and the engineering hydraulic system as the filtering device. It is also equipped with a differential pressure transmitter. When the filter needs to be replaced, the differential pressure transmitter can send an indication signal in time.