The air cleaner is
located on the right side of the engine compartment. Namely the right
front wheel position, with a soft rubber hose arm connected to the black
square plastic box.
Method of disassembly of air filter
Apart the two metal
clamps which is toward the rear, making the entire air filter box cover
forward, remove the filter clean-up can be.
1. When the filter is removed, if the rubber hose is involved, loosen the tube card with the Phillips screw and remove one end.
2. If the filter is disassembled and other obstacles are encountered, remove it carefully.
The replacement of air filter
Based on the
environment of use, the air filter in general every 1-3 months need to
clean up once. Such as in a larger dust area, it needs to shorten the
cleaning cycle.
In this case,
Remove the air filter
filter to the dust, with high-pressure gas nozzle blowing, and blowing
the net inlet box. Be careful not to get too close, or use a bicycle air
pump, or use a soft brush handle.
1. Air filter element should not be washed
2. No moisture should be left in the air inlet box
3. Damaged air filter element must be replaced in time
The air filter must be
remembered for removal. If the filter installation is not smooth, should
identify the reasons to continue, without the use of brute force. If
the filter can not be installed, you can not install the filter, remove
the box fragmentary objects, cover the back cover, put the tube, drive
to the repair shop.
