The oil filter is used to filter dirt, metal particles, carbon deposits, particles and other impurities in the oil to protect the engine.

Where is the oil filter installed?
The position of the oil filter element is different according to different engine models, and the position of the oil filter element is also different, but the main position is at the front top and under the engine.

How to replace the oil filter The replacement procedure of the oil filter can only be removed with a special tool or a wrench of the same size, but it should be noted that the oil needs to be cleaned first. There is an oil drain screw at the bottom of the engine, which can be loosened and put into a container. Every time the oil is changed, it should be changed together with the oil filter.

The replacement method is as follows:
① Turn off the engine when warming up, wait for a few minutes, lift the vehicle, and drain the old oil from the oil pan and oil filter.
② When the old oil is completely drained, remove the oil filter with a filter wrench.
③ Prepare the same filter element or oil filter, first coat a layer of oil on the O-ring of the filter element, and then tighten it with the specified torque.
④ Start the engine and observe whether the filter leaks at idle speed. If there is any leakage, remove the oil seal skirt and check it to eliminate oil leakage.