Oil prices have skyrocketed and freight rates have continued to plummet. These two topics are the most recently received information. If oil is more expensive and freight is lower, income will be lower. For card friends, fuel saving is a top priority.

Many card friends choose to add small oil, but adding small oil is more harmful. Diesel engines mostly use high-pressure common rail fuel systems, and their accessories are very delicate in workmanship, so the quality of diesel is very high. The hazards that may be brought about by adding small fuel are corrosion of the fuel sensor, overhaul of the engine, and replacement of the fuel injection nozzle. Not only does it delay time, but the maintenance cost is also quite high.

But even if you don’t add petrol, the quality of diesel on the market is uneven, so how can we protect our car when we can’t tell the quality of the oil?

Inferior fuel water separator causes engine weakness and stalls

As we all know, the biggest problem with diesel in winter is that it is easy to solidify and wax out, which makes it difficult to start the vehicle and may damage the fuel injector. The vehicle will also experience unstable speed and insufficient power. Therefore, either the high-grade antifreeze diesel oil must be added, or the fuel tank must be dual-chamber with heating function.

Many card friends will install a fuel-water separator on their cars, which can effectively filter out fuel substances, separate the water in the fuel, and provide clean fuel for the engine. In order to reduce the failure of the fuel injector and extend the service life of the engine.

But once a poor-quality fuel water separator is installed, or there is a problem with the fuel water separator, the moisture and impurities in the diesel will enter the engine and cause damage. The car will have the problem of engine weakness, instability, and increased fuel consumption.

How to choose a good quality fuel water separator

◆ Purchase products from regular manufacturers

The price of the fuel water separator ranges from a few hundred to a few thousand. Cheap things have only the advantage of being cheap. We still have to use money to make up for the subsequent troubles. So remember not to buy a bad quality fuel water separator for the cheap price in front of you, but to buy a product that is really cost-effective.

◆ Replace the filter element regularly

Replace the filter element regularly in accordance with the instructions for use to maintain the filtering effect of the fuel water separator. At the same time, it is also necessary to ensure the quality of the filter element, because the quality of the filter depends to a certain extent on the quality of the filter element.

Mrefilterl filter element 1105050-2007 adopts multi-layer composite nanofiber filter material, which has more than 99% water filtration effect and corresponding particle filtration effect, which can effectively protect the engine. The maintenance cost is low, and the maintenance cycle of 100,000 kilometers can be achieved under normal oil products and regular roads, so you can save worry, effort and money!!!

◆ Choose an fuel water separator with heating function

It is cold in winter, and the filtered water is stored in the water cup for a long time, which is easy to cause icing. Many card friends will wrap the water cup with a thick coat, but it is still recommended that you choose electric heating Functional fuel water separator. This can effectively protect the normal use of the fuel water separator in cold weather.