Every good truck driver is a master, the truck repair also be nothing difficult.

Oil filter is one of the common parts of the truck maintenance, need to be replaced regularly, at this time if you can solve it, it will save time and save money! Here are few steps to replace the truck oil filter, it is recommended that professional personnel to replace the oil filter if cannot skilled operation of the case.

1.  Open the oil plug, use oil basin, release used oil from engine,evenly coated with oil on new oil filter rubber.

2.  Load oil screw after emptying oil completely,remove old filter,then screw the oil filter to the seat.

3. Tighten the oil filter according to the torque of the service manual.The seal ring of oil filter is a kind of special material, when spin-on it, please do not use too much force,so as not to cause disassembly difficulties.

4. Clean the dirty parts around the filters;

5. Add oil, after adding please tight the filter cap, check the oil level.

6. tart the engine idle and accelerate for a period of time, check whether there is an oil leak,after a few minutes, and then review the oil level. If no oil leak, it means oil filter has finished replacing.

Oil filter – ANHUI MEIRUIER FILTER CO.,LTD.

Welcome to buy, you can choose wholesale or as an agent !

Tel: 0553-8118111