Filter element type of oil filter
2016-07-02 View:
1. Centrifugal filter, using pressure lubrication system itself, a
reaction torque generated by the oil nozzle, to drive the rotation of
the rotor, rotor in oil under the action of centrifugal force isolated
solid impurities, the accumulation of in the inner wall of the rotor,
the center part of the rotor oil became clean, shell from the bottom of
the nozzle flows back to the oil. This is the principle of centrifugal
filter. If the oil in the center of the rotor is directly introduced
into the main oil channel, it becomes the whole flow centrifugal filter.
2 plastic filter, the use of a certain heat and corrosion resistant
engineering plastic, molded through the porous nature of the filtering
effect of the filter. This filter can be maintained after a certain code
of practice to continue to use.
. around the line type filter, steel or brass band rolling into, the
surface every certain distance have a convex shape, mm height of the
convex 0.04~0.09, to the metal band is wound on a surface of the groove
of the corrugated tube, the underside of a band and a band convex
surface contact, resulting in the formation of many gaps, which is
around the line slot type filter.
4. The metal filter core net, every inch of 100 ~ 200 mesh copper wire
mesh or brass wire mesh as filter material, filter shape is cylindrical
and laminated sheet shape. Metal mesh filter flow, small resistance,
reliable, easy to clean, commonly used for full flow filtration. As the
mesh filter fineness specifications. In recent years, due to the
development of chemical industry, it has been useful to support the
framework of the filter mesh, nylon cloth instead of metal mesh, such a
structure, saving non-ferrous metals, is conducive to the development of
production.
5 chip with sit up and take notice filter, thin steel strip steel sheet,
filter, spacers, scraping punch made of three kinds of shapes. The
thickness of the filter sheet is 0.1~0.2 mm, the thickness of the spacer
and the wiper blade is 0.06~0.08 mm. The filter core is composed of a
plurality of pieces of filter sheets and a spacer alternately. Scraping
plate is fixed on another pillar, each scraping sheet is inserted
between the two filter, rotating filter attached dirt on the edge of the
filter was scraping scraped, settlement at the bottom of the filter
shell, through the drain plug to let go. The rotation of the filter core
can be operated by hand and foot, and can also be driven by mechanical
transmission.
6. Filter element of sawdust, sawdust filter also called sawdust filter,
with the red and white pine sawdust as raw material, the screen
sorting, mixed with pulp moulding forming, dewatering and drying, single
sawdust filter a variety of raw materials, simple process, good
filtering fineness. This is its advantages. However, due to the dense
structure of the filter core, the resistance is larger, a shorter life,
can only be used for shunt filter.
7 microporous filter core, with a resin impregnated special filter
paper, after the heat curing process stiffness and strength are greatly
improved, can withstand a certain pressure difference. The paper filter
in the process of using pincha, shorten the service life. In order to
overcome this shortcoming, in the filter wall lining and lining in a
frame, or on the surface of filter paper rolling corrugated waveform,
its service life can be increased by 2 to 3 times.