1. When we install the oil filter, we should clenched it tightly with both hand. Do not allowed to usd wrench or pipe clamp tight.

2. As the material of oil filter is thin metal, it will deformationa and squeeze the filter element if screwing it tight.

3. The oil filter is one-time use of parts. If we can’t get it out by hand, we can use a pipe clamp or other tools to disassemble.

4. After replacing the oil filter, we should start the engine and run 5-10min and observe the sealing effect of the seal carefully. It shoudn’t have the phenomenon of oil spills
5. Oil filter assembly can only be used once. We should be in accordance with the instructions, regular replacement of oil at the same time to replace the oil filter, and fill the oil.