2017-02-16 View:
1. The deflector plate of the air filter should be kept intact, and the
tilt angle should be 30-45 degrees. The blade surface can not be painted to
prevent oxidation of particles into the cylinder.
2. Air cleaner maintenance to clean up through the breathable mesh. On the dust
collection cup, dust particles shall not exceed 1/3 height, otherwise it should
be cleared in time.
3. Fine filter oil level should be
consistent with the standard, too high lead to oil into the cylinder area of
carbon, too low to reduce the role of the filter, so that wear faster.
4. Metal mesh filter used in the substitute, the hole diameter of the wire or
only slightly smaller, can not be increased, otherwise it will reduce the
filter effect.
5. The intake network may not have leakage phenomenon, filter cleaning should
be carried out in the smoke dust place.